Today’s discussion will be on Polycom and how to upload the latest Firmware.For some of you this will be a repetitive read, if you have done this before, but for those just starting out in the industry, or just wanting to learn some new information on Vo IP, then this is for you.It will just take a little time, some elbow grease and some hardware.
You can find tons of programs like this on the internet but the one that we use in our house is Solar Winds.
Then enter all the required information and then click “Download Software”.
Choose which method of download you prefer and install the software on your local Windows-based machine.
In your installation process, you will be prompted to download 2.0 which can be downloaded here if not already installed:
Place the “Polycom Firmware Folder” inside the TFTP-Root Folder. TFTP Server address: 192.168.1.97, Polycom Phone address: 192.168.1.99).
Go back to your TFTP Application which should be open on your desktop. This is essential for the phone and the TFTP server to communicate with each other.
Click File, then configure and set the following: After you have clicked OK, your TFTP Server application should look like this: Now for the Polycom Phone fun! Plug in your Polycom IP Phone and press the SETUP button to stop the auto-boot process when prompted. This process can be done on multiple Polycom units at the same time; there is no need to do one at a time if you have multiple units to upgrade.
familyid=0856eacb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en Click download: After you have downloaded the application, open or run the Solarwinds application on your desktop: When opened it will look like this: Next, you will want to download the Polycom Firmware and Bootrom Files from the Vo IP Supply FTP website.
If you don’t have credentials, and you bought the end point from us, then give us a call or shoot us an email and we will be glad to grant you access. Scroll down and you will find PDF files, Boot Rom Files and Firmware Release ZIP files.